How to Boost Mic Volume on Windows
Start by making sure you have Tandem properly downloaded.
(Note: Tandem is a virtual office for remote teams. You can create a Tandem account and download the app here: https://tandem.chat/)
Once you have Tandem open, from the Windows Desktop Screen, right-click on the ‘Sound’ icon and from the options displayed, select ‘Recording Devices’.
Right-click on the active microphone. The active microphone has a green check-mark marked against it. Depending upon the setup there may be multiple microphones present.
Again, right-click the active mic and select the ‘Properties’ option.
Then, under the Microphone Properties window, from the ‘General’ tab, switch to ‘Levels’ tab and adjust the boost level.
By default, the level is set at 0.0 dB. You can adjust it up to +40 dB using the slider provided.
Be sure to carry out the process during your conversation so that you get the feedback from the other end immediately. This will also tell you whether the adjustments made are appropriate or not.
Microphone volume too low
In rare cases, it has been observed that boosting the microphone volume may not solve your problem. If it is so, select the ‘Advanced’ tab from the ‘Microphone Properties’ window instead of ‘Levels’ and uncheck the option that reads as ‘Allow application to take executive control of this device’.
Microphone Boost option not available
Audio features depend on the chipset and drivers installed. If you do not see the Boost option, you may try the following:
Change the port to connect the Microphone
Run the Recording Audio troubleshooter
Update Drivers: Updating Sound, Microphone & Audio drivers will help. If it is a Realtek chipset, you can get the updated drivers from Realtek.